Skip to main content

Fermentation Tanks

Brewtique offers fermentation tanks with ultra-precise welding and polishing, complete traceability, and validated material quality to meet all international safety standards.

Our pressure tanks manufacture by NDL Craft range from 5hL to 150hL in size. All our pressure tanks are registered and certified for use in Australia.

ALL OUR FERMENTATION VESSELS ARE BUILT TO THE FOLLOWING SPECIFICATIONS:

  • Fermenters have 25% and bright tanks have 20% headspace minimum
  • Interior Shell: SUS304 fully welded; TH = 3-3.5mm
  • Exterior Shell: SUS304 fully welded; TH = 2mm
  • Dish Head & Inner Cone SUS305 fully welded; TH = 4mm
  • 100% TIG Welding with pure argon gas shield
  • Interior Finish: Sanitary 2B finish, Pickled and Passivated
  • Interior fully polished to a consistent 0.6um
  • Insulated with high density polyurethane foam; TH=100mm
  • Glycol jacket: dimpled plate on cone (fermenter and sides.
  • Dished head and 60-degree cone bottom on fermenters
  • Dished head and bottom on bright tanks
  • CIP arm with 360° coverage spraying ball
  • Full sanitary metallic sealed sampling valve
  • Double-acting gas vent valve (below 80hL)
  • Pressure and anti-vacuum valve (above 80hL)
  • Thermowell for high accuracy temperature sensor
  • TC carbonation port with stone (optional on fermenters)
  • SUS304 heavy duty legs with levelling pad and leg supports
  • Sanitary level tube and butterfly valves
  • CO2 blow-off arm with butterfly valve (fermenters)
  • Rotating racking arm and port on cone with butterfly valve (fermenters)

We can also offer slimline 1000L Fermentation Tanks for Brewpub locations that have space constraints.

Bright Tanks

Manufactured by NDL Craft, Brewtique offers a range of bright tanks ranging from 5hL to 150hL in size. All of our standard size bright tanks are registered and certified for use in Australia.

ALL OUR BRIGHT TANKS ARE BUILT TO THE FOLLOWING SPECIFICATIONS:

  • Fermenters have 25% and bright tanks have 20% headspace minimum
  • Interior Shell: SUS304 fully welded; TH = 3-3.5mm
  • Exterior Shell: SUS304 fully welded; TH = 2mm
  • Dish Head & Inner Cone SUS305 fully welded; TH = 4mm
  • 100% TIG Welding with pure argon gas shield
  • Interior Finish: Sanitary 2B finish, Pickled and Passivated
  • Interior fully polished to a consistent 0.6um
  • Insulated with high density polyurethane foam; TH=100mm
  • Glycol jacket: dimpled plate on cone (fermenter and sides.
  • Dished head and 60-degree cone bottom on fermenters
  • Dished head and bottom on bright tanks
  • CIP arm with 360° coverage spraying ball
  • Full sanitary metallic sealed sampling valve
  • Double-acting gas vent valve (below 80hL)
  • Pressure and anti-vacuum valve (above 80hL)
  • Thermowell for high accuracy temperature sensor
  • TC carbonation port with stone (optional on fermenters)
  • SUS304 heavy duty legs with levelling pad and leg supports
  • Sanitary level tube and butterfly valves
  • CO2 blow-off arm with butterfly valve (fermenters)
  • Rotating racking arm and port on cone with butterfly valve (fermenters)

Other Tank Solutions

Other tanks we provide include Hot Liquor and Cold Liquor tanks, Glycol Water Tanks, Single Jacket Waste Water Tanks and CIP Solutions.